enLanguage
Square Photoelectric Pod

Square Photoelectric Pod

Product introduction ZP3C065-2A photoelectric pod integrates miniature visible light camera and infrared thermal imaging camera, adopts 3-axis pan-tilt control technology, and integrates AI image recognition technology, and is equipped with an 8-megapixel fixed-focus camera and a thermal imager...

Product Introduction

Product introduction
ZP3C065-2A photoelectric pod integrates miniature visible light camera and infrared thermal imaging camera, adopts 3-axis pan-tilt control technology, and integrates AI image recognition technology, and is equipped with an 8-megapixel fixed-focus camera and a thermal imager with a resolution of 640*512, which can realize the functions of AI automatic recognition and tracking of people, cars and other targets. It is often used as an optical supporting device for small unmanned aerial vehicles and bee colonies, and is linked with flight control to realize the intelligent task execution of unmanned aerial vehicles.
With its compact appearance and excellent AI image recognition ability, ZP3C065-2A photoelectric pod can increase the stability in three directions: heading, rolling and pitching, and can be equipped with a damping system to further enhance the stability of the picture, so that it can successfully complete the tasks of target reconnaissance, target recognition, target tracking and target attack.

 

product function

Basic function
Support high-definition visible light and infrared thermal imaging image acquisition, and support 2 channels of video output.
Self-stabilization and control function of 3-axis pan/tilt supporting pitching, heading and rolling.
Support the AI automatic detection function of targets such as personnel and vehicles.
Support AI tracking function for people, vehicles and arbitrary targets. 
Support real-time output of parameters such as pitch angle, heading angle, roll angle and video coordinates of target image.
Support locked-rotor protection, zeroing, drift correction, pan/tilt self-inspection, guidance mode and other functions.
Provide equipment communication control interface protocol to facilitate system integration.

 

Product parameter

Yuntai parameter
Degree of freedom of pan-tilt 3-axis
Size (length * width * height) ≤66mm*66mm*76mm
weight ≤128g (damping and mounting screws are not included in the weight of the pod)
Pitch angle rotation range -120°~+20°(上正下负)
Steering angle rotation range -90 ~+90 (Zuo Zheng right negative)
Rolling shaft rotation range -40°~+40°
Pointing accuracy of turntable ≤0.5°
Maximum search speed ≥10°/s
operating voltage 12V

 

Fixed focus visible light parameter
focal distance 12.0mm
resolution ratio 3840 * 2160 (8 million)
viewing angle 49°(H)*28°(V)
Pixel size 1.45μm(H)×1.45μm(V)
frame frequency ≥30HZ
CMOS Diagonal 6.43mm(1/2.8 type)
shutter Electronic shutter door
detection range 2000m 
AI recognition distance (2.3m*5m target) 700m

 

Infrared thermal imaging parameters
focal distance 9.1mm
resolution ratio

640*512

viewing angle

45°(H)*37°(V)

Pixel size

12μm(H)×12μm(V)

frame frequency

50HZ

spectrum

8~14um

F coefficient

8~14um

NETD

≤50mk@25℃

detection range

600m

AI recognition distance (2.3m*5m target)

100m

 

Hot Tags: square photoelectric pod, China square photoelectric pod manufacturers, suppliers, factory, Infrared Reflective Film, Medium Wave Infrared Lens, Short Wave Infrared Lens, Ultraviolet Lithography Lens, Concave Lenes, Manual Focusing Lens

Send Inquiry

whatsapp

Phone

E-mail

Inquiry

Bag